【美國GUNK】皮帶保養防護劑  


使多楔皮帶和V型皮帶更長的使用壽命
提供皮帶更好的咬合力和牽引力,同時消除尖銳和震顫噪音
最新技術配方


$200
規格型號 M206
庫存狀況 現貨
購買數量

加入購物車


標籤 Gunk 皮帶

GUNK® Belt Conditioner is for use on all conventional “V” and Micro-V “Flat” Serpentine Belts in Cars, Trucks, Boats, Appliances, Heating & Cooling Systems, Tractors, Machinery, & Heavy Equipment.

皮帶保養防護劑適用車輛、卡車、船舶、制冷及加熱設備、拖拉機、機械及重型設備的各種型式V型皮帶、三角皮帶及楔型皮帶。

DIRECTIONS:

  1. Keep hands away from moving belts and shut motor off before use. Determine if belt tension meets manufacturer’s recommended specifications. Examine belt for deterioration, cracks or worn surfaces. If the belt needs adjustment or replacement, take the proper steps to correct. 
  2. Hold can upright about 12 inches from belt and spray small amount on underside of belt just before the pulley. Use extension tube for hard to reach places. Wipe excess. Allow belt to run for several minutes to distribute product evenly. 
  3. Repeat every 3 months or 3000 miles to help keep rubber soft and flexible. If belt still squeaks, further adjustment or replacement is necessary. IMPORTANT: Pretest painted, varnished, lacquered or plastic surfaces. Flush surface with water after testing.

使用方法:

  • 不要讓手靠近運轉中的皮帶,使用前將引擎熄火。確認皮帶張力符合車廠規定的規範。檢查皮帶是否老化、裂紋或磨損。如果皮帶需要調整或更換,請適當處理。
  • 距離約12英寸垂直噴灑在皮帶上,噴灑少量在皮帶的側面。如果有難以觸及的部位,請使用產品附贈細管。用乾淨布料擦去多餘保護劑,轉動皮帶幾分鐘至保護劑均勻分佈。
  • 靜待藥劑揮發乾燥後啟動引擎 

下圖是新包裝,如果收到下圖包裝,是相同產品

發表評論


注意 不支援 HTML 語法
點擊 「繼續」按鈕 即同意:「我保證本則針對此商品的評論,其內容是以本人的切身經歷為依據,係本人的真實評論;且本人與此商品無個人或商業關係,也無收受此商品的餽贈或金錢以撰寫這則評論。」

繼續