Cleans engines in 5 minutes. Frees up sludge associated with slow city driving. IMPORTANT. Motor Flush is not recommended for Turbo Charged engines, when the Turbo Charger is lubricated by the engine oil.

五分鐘清洗引擎油路，去除市內慢速行駛所造成的油泥，注意，本商品不適用於渦輪增壓引擎。

DIRECTIONS:

1. Check to make certain oil in crankcase is up to safe level.
2. Add MOTOR MEDIC Motor Flush to cold engine before changing oil and filter.
3. Idle engine at normal speed for 5 minutes.
4. DO NOT DRIVE THE VEHICLE. MOTOR MEDIC Motor Flush will circulate throughout the entire lubricating system of your engine dissolving sludge, gums and varnishes from engine and oil pan. It also frees sticking valves and rings.
5. Drain crankcase and remove oil filter. Replace drain plug and install new oil filter. NOTE: On engines with 75,000 miles or excessive deposits, remove and clean the oil pan to minimize the risk of engine damage.
6. Refill crankcase with oil. NOTE: Extremely dirty engines may require repeat treatment. Follow directions 1 to 4.

使用方式：

1. 使用前先確認油箱內的機油在安全的液位，預留倒入清洗劑後也不會過滿溢出的前置量。
2. 在更換機油與濾清器前，將清洗劑倒入引擎油箱內，
3. 啟動引擎並讓車輛怠速空轉5分鐘。
4. 千萬別採踏油門，清洗劑會在引擎潤滑系統循環油路內清洗油泥、積碳、清漆等沉積物，並暢通閥門及活塞環。
5. 排洩掉舊機油並更換新的濾清器，行駛高里程的車輛一定要更換機油濾清器，以避免機油濾清器被沖洗下來的髒汙堵塞。
6. 加入新的機油，如果是極度骯髒的引擎，可重複上述1~4步驟。